High output and quality
Bonding
These products are developed with polyester - , epoxy - , polyurethane - and epoxy - crylate - based resins and are used to bond, fill and repair marble, granite, quartzite, ceramic and engineered stone surfaces.
These products are developed with polyester - , epoxy - , polyurethane - and epoxy - crylate - based resins and are used to bond, fill and repair marble, granite, quartzite, ceramic and engineered stone surfaces.
1. Low - viscosity transparent.
2. Ideal for internal and external visible joints.
3. Suitable for slot filling, for embedding and reinforcement.
4. Workable after 20 - 30 minutes.
5. Curing 12 - 16 hours.
1. Even better penetration on natural stone.
2. Especially suitable for reinforcing porous surfaces.
3. Particularly suitable for deep cracks.
4. Particularly suitable for treating fragile natural stone.
5. Workable after 24 h at approx. 20° C
Two - component, pre - dyed gel adhesive, based on epoxy - acrylic resin and produced in different colours.
1. High adhesion
2. Fast dryer
3. Very fast workability recovery
4. Food compatible (confirmed by German external examining body)
Polysoft is a 2 - component paste product based on unsaturated polyester resins dissolved in styrene, containing mineral filling agents.
The product is characterised by the following qualities:
1. Good working properties, creamy - soft consistency especially on vertical surfaces.
2. Fast curing (20 - 60 minutes).
3. Good working properties (grinding, milling, drilling).
4. Good polishing properties.
5. Very good adhesion on natural stone even at higher temperatures (70 - 80 °C / 158 - 176 °F; at low exposure to deformation: 100 - 110 ° C / 212 - 230 ° F).
6. Resistant to water and mineral oils.
AKEMI® PLATINUM P+ adhesives are 2 - component products based on unsaturated epoxy acrylate resins dissolved in styrene.
The product is characterised by the following qualities:
1. wide range of application due to different consistencies.
2. very clear and transparent colour.
3. fast curing (15 - 40 minutes).
4. improved adhesion and bond strength, even on Techno Ceramic.
5. better protection against yellowing.
6. excellent adhesion on natural stone even at higher temperatures.
7. excellent surface drying.
8. highly polishable.
9. resistant to water, petrol and mineral oils.
10. After curing, it poses no health risk in contact with food. Confirmed by German external examining body.